Vibrating Feeder VRRE

 Vibrating Feeder VRRE

Vibrating Feeder VRUW

 Vibrating Feeder VRUW

  • Capacity= 220 t/h sand,18 t/h castings/h
  • Length= 7.500 mm
  • Width= 1.400 mm
  • Maximum weight of castings= 450 kg
  • Temperature of castings= 650 °C
  • Temperature of sand= 450 °C
  • Capacity= 220 t/h sand,18 t/h castings/h
  • Length= 5.600 mm
  • Width= 1.000 mm
  • Maximum weight of castings= 450 kg
  • Temperature of castings= 650 °C
  • Temperature of sand= 450 °C

 

Vibrating Feeder VRRE

This type of Machine should be used directly after the moulding line for Sand and/or Casting transport, before the shake out, if you want to take out the castings by manipulator or if you have to cross a distance before the shake out. Another application is to feed very heavy castings diretly after the shake out.

Standard Dimensions:
Length: 3.000 mm, 4.500 mm, 6.000 mm, 7.500 mm.
Width: 1.000 mm, 1.250 mm, 1.400 mm, 1.600 mm, 1.800 mm, 2.000 mm.
Other Dimensions are available.

Vibration Data:
1.000 rpm with 8 mm Amplitude, 1.500 rpm with 3 mm Amplitude.
Electric Power:
7,5 kW – 30 kW

Exciter is normaly below the machine, but also available above the machine.

The design of this machine is very heavy. Different wear plates are available in S 235 JRG 2, Hardox or others. Heating Elements are available as option against sand cake.

Needed Data:
Feed rate:
Length:
Width:
Max. Weight of Castings:
Temperature of Casting:
Temperature of Sand:
Example:
100 t/h sand ; 20 t/h castings
6.000 mm
1.400 mm
250 kg
650°C
120°C

Always Steel springs are used, no rubber springs.

Vibrating Feeder VRUW

This type of Machine can be used for Feeding Castings or sand with low temperature.

Standard Dimensions:
Length: 1.000 mm, 1.500 mm, 2.000 mm, 2.500 mm, 3.000 mm, 3.500 mm, 4.000 mm, 4.500 mm, 5.000 mm, 5.500 mm, 6.000 mm, 6.500 mm, 7.000 mm, 7.500 mm, 8.000 mm.
Width: 400 mm, 600 mm, 800 mm, 1.000 mm, 1.200 mm, 1.400 mm, 1.600 mm, 1.800 mm, 2.000 mm.

The length between those Dimensions is realised by an outlet. Other Dimensions are available.

Vibration Data:
1.000 rpm with 8 mm Amplitude, 1.500 rpm with 3 mm Amplitude.
Electric Power:
0,5 kW – 16 kW

Unbalance Motors at the side or at the back. Different wear plates are available in S 235 JRG 2, Hardox or others. Rubber inlet against noise between trough and wear plates are available.

Cooscilating Hood with dedusting exhaust as option available. Heating Elements are available as option against sand cake. Always Steel springs are used, no rubber springs.

Needed Data:
Material:
Feed rate:
Length:
Width:
Temperature of Casting:
Temperature of Sand:
Example:
Castings
100 t/h
6.000 mm
1.400 mm
300°C
120°C

If you send us your foundry Layout or a drawing of your Moulding Line , we will prepair a project Layout for you.