The exciters are used anywhere where a high standard of reliability and security will be provided. Through the concept and the high quality demands of the JML-Industrie, we can ensure a long service life and lower cost of maintenance. If desired, the exciters with an oil lubrication system including an additional oil cooler are fitted. The design of the exciter is so simple and ingenious. It has two shafts with unbalanced masses which are connected by a gear transmission. In contrast to the vibrators the exciters have transferred to the advantage of a defined force as well as a defined mechanical loading in the vibrating machine.
One of the most common applications for vibration motors is operation of two vibration motors rotating in opposite directions and generating linear vibrations. Because the motors are not coupled mechanically, the free synchronization is ensured only by means of frequencies of the motors. After start-up, the motors are not synchronized at first. Full synchronization is achieved during operation at equal frequencies. During this procedure, the driving frequency must not be disturbed in any way; otherwise the motors are not able to achieve full synchronization.
The eccenter drive is used for a long and castings carefully conveyor . Through the concept and the high quality demands of the JML-Industrie, we can ensure a long service life and lower cost of maintenance and simple. The structure of the eccentric drive is as easy as it is ingenious. He has one or two eccentric shafts depending on the design of the vibratory conveyor and is transferred to the advantage of a defined force as well as a defined mechanical stress.